08000 322 122
United Kingdom
1800 322 122
Republic of Ireland
Quinn Lite aircrete blocks manufacturing

Energy Efficiency Improvements in Quinn Lite Plant

Quinn Lite have introduced a number of measures to reduce energy usage and waste in the manufacturing process of the aircrete blocks. The company reviewed their manufacturing process in a bid to determine where improvements could be made to ensure minimal environmental impact and maximise efficiencies. As a result, a series of improvement measures have been implemented in the last four months which have already seen a return.

A new heat exchanger system was commissioned and installed in the plant to capture the excess heated water produced to be re-used in the manufacturing process. The energy is no longer wasted, but instead is now pumped back into the system to heat the pre-curing chamber and help maintain the optimum temperature.

Achieving a temperature of 36-40 degrees in the pre-curing chamber is an important part of the manufacturing process to ensure the liquid “cake mixture” achieves the right consistency. It is at this stage of the process that a chemical reaction occurs between the raw ingredients which forms gases and fills the mixture with tiny pockets of air and gives Quinn Lite blocks their excellent lightweight and thermal properties.

Achieving and maintaining the correct ambient temperature in the chamber therefore requires energy usage. In order to further reduce this energy requirement, Quinn Lite also insulated the entire chamber with Quinn Therm insulation, significantly reducing heat loss and energy requirements without increasing production time. In addition, the new system allows greater control over the temperature of the pre-curing tunnel, which is regulated to prevent excess heat and energy.

The changes introduced help to ensure a constant temperature for this crucial stage of manufacturing and also help the heat to be more evenly dispersed through the cake mixture, further improving the block quality. The newly enhanced facilities have the knock-on benefit of allowing for the reduction in lime content in the Quinn Lite mix, which is used as a heating agent. The lime ingredient is supplied by a third party, so reducing the quantity saves on both production costs and transport requirements, therefore further reducing the carbon footprint.

Speaking of the recent changes, Quinn Lite’s Production Manager, Kieran McGorman, said,

“The changes we’ve made form part of a larger, company-wide drive to minimise the impact of our operations on the environment and to maximise efficiencies wherever possible. Given the nature of the Quinn Lite blocks, these improvements in energy efficiency, reduced waste and greater thermal efficiency are very fitting and will give customers even greater confidence that they are using a more sustainable product.

We’ve already seen very promising results from the changes, both in financial return and energy savings and we expect this to improve further in the coming months as the changes bed in and efficiencies are maximised.”

Find out more about the manufacturing process and how Quinn Lite thermal blocks compare:

Related videos